The 3.5mm Analogue input takes priority over the RCA input. This means that if you have a source connected to 3.5mm input, the RCA input will be ignored. Simply unplug the cable connected to the 3.5mm input.
This can happen even though the speaker's volume is set to maximum.
This is because the volume on your analogue source is independent. Please make sure that the volume control of your analogue source has been set to maximum. If this is set to maximum, but the volume is still low, then maybe the analogue output of your source is very low. In such a case you will need to use a preamplifier.
You can connect any source with an analogue output, like: Cell Phone, Smartphone, Tablet, MP3 player, PC, CD, TV, DVD, Turntable through phono stage, etc…
You should preferably use Wi-Fi, since with Wi-Fi there is no compression involved, making the sound more natural and dynamic.
Because there is compression involved.
The standard compression for Bluetooth is SBC, which lacks transparency in the high frequencies. If you use a Bluetooth source with Apt-x codec support, then the results will be better. Of course, you will still get the best performance through Wi-Fi.
With Bluetooth you play whatever you want.
Bluetooth has the advantage that it acts like a virtual sound card for your tablet / Smartphone or PC. This means that, whatever streaming service or internet radio station you listen to on your device, it will be transmitted faultlessly to the speaker without you having to worry if your streaming service of choice is currently supported by the speaker or not.
Firstly, verify that the volume is set to maximum on the speaker. You will then need to turn up the volume on the Smartphone / Tablet. These two volume controls are independent, so you need to control both of them.
In order to play songs through Bluetooth, you need to use the default music play of your tablet/Smartphone.
Only when the BT input on the speaker is selected you are able to see the speaker listed under Bluetooth devices on your Smartphone / Tablet. If an input other than Bluetooth is selected (AUX / Optical / Wi-Fi), then the Bluetooth interface is deactivated.
Bring source and speaker closer
Bluetooth has a maximum operational distance of about 10 meters. It is also very sensitive to obstacles between your Smartphone / tablet and speaker. If you are experiencing audio drop-outs, it is recommended to either move closer to the speaker or use the speaker with Wi-Fi.
Υou can jump to previous / next song any time you wish, just by pressing the relevant buttons on the device or on the remote.
Each button serves a different function, depending on if it is pressed short or long. A short press is pressing briefly once. A long press is pressing and keeping it pressed for more than 2 seconds.
All speakers are equipped with audio limiters, so that you can play loud without going over the safe level.
To obtain maximum audio performance you are strongly advised to disable the TV's own speaker and let only the Wisound speaker play. Please refer to your TV's menu for a selection of Audio Output Setting and set it to Optical. Alternatively, you can find an option to disable TV's speaker.
No, not needed.
The App can operate with many smart phones/tablets in parallel. This means that if you have selected a song, at any time, your friend can select another song from another smartphone/tablet. Your song will stop and your friend's song will start.
You can select the relevant input and adjust volume from speaker's buttons or remote control without making use of your tablet/smartphone
Select from the App either L or R.
When you are in the Device List inside the App, there is a ‘LR’ symbol on the bottom right. Pressing on that symbol, it cycles: LR-->L-->R, so that you can choose that specific speaker to play both left and right, only Left, or only the right channel.
Use your phone's / tablet's speakerer volume buttons
By using your phone's volume buttons, you can control the volume of all the speakers simultaneously.
On the bottom of the Device List, there is a button Play All / Pause All. Each time you press it, you play or pause the music to all the speakers of the system.
The purpose of defining one speaker as ‘Master’ and some as ‘Slaves’ is to make a group that will play the same music.
Having your speaker updated is recommended, since new features and improvements are added in each new release of the firmware.
One is on the phone / tablet and one is on the speaker
The App is the software that runs on your tablet or Smartphone, while the Firmware is the software that runs on the speaker.
Learn function is designed to teach your speaker to respond to Volume UP/DOWN commands of your TV's remote. Follow the steps described in the quick guide.
Control the speaker's volume
The LEARN function is supported by both Teevy and Cuby series.
In a remote music server
The search results come from a big music server. You can access your favorite songs and artists very easily.
Yes, of course.
Τhat's what Bluetooth is for. Simply use the Spotify App on your device and pair your smartphone or tablet to the speaker via Bluetooth.
You need to run the Spotify App, select your favorite music and then press on the Spotify Connect icon. Spotify Premium is supported by the native Spotify App. You will then find the list of available speakers to play music to.
Use either Airplay or DLNA
For IOS devices, you always have the option of Airplay. For Android devices you will need to play through either Bluetooth or a 3rd party App (like Bubble UPNP, etc…)
By firstly selecting settings (cog wheel) and then pressing on Speaker Info. From here you can see Device Name, SSID, Firmware release version/date, change of language prompts, etc...
No need. The speaker needs to be configured only once. Once properly configured, the speaker will try to connect to the last configured Wi-Fi router.
This is normal
This is absolutely normal. Each speaker is equipped with an automatic wake-up mechanism. When it senses audio coming from either Optical or Analog inputs, it wakes up and starts music reproduction.
Wake up from standby is activated.
The Auto Wake-Up mechanism can also select the input. For example, If music comes into the analogue input, the speaker will wake-up and select Analogue as input source no matter what was the source before turning it off. The same applies for Optical input.
This is what exactly happens.
The speaker remembers the volume setting before standby and wakes up with the same volume setting.
It is not recommended to leave the speaker on if not in use.
Just wait a bit.
The speaker needs about 30 seconds to turn ON in Wi-Fi mode. During these first 30 seconds the Orange LED blinks and Wi-Fi is not in fully operational status. Please wait a while until you listed to the booting sound. Now your speaker is ready for use.
It is recommended that you disconnect the power supply from the wall outlet. Like this, you will save the minor standby current consumption.
If you select the settings (cog wheel) and then select Speaker Info, there is a Device Password option. If you select this option, a pop up will appear inside which you will need to select WPA PSK and then fill your password.
This is normal.
You will need your tablet or Smartphone to configure only once the relevant radio presets. You will then access the presets by pressing the relevant buttons on the speaker's keys or remote control.
Bluetooth is 10m, Wi-Fi is 30m.
Simply, select the settings (cog wheel) of the speaker of interest. You will then need to select Device Content. From the presets list, chose which one you want to listen to.
Presets are stored on an internal memory and cannot be erased with a power cut.
This is normal if radio station stopped broadcasting.
TuneIn is a dynamic database of radio stations that constantly updates the guide to add more and more content. If you cannot find the specific radio station anymore, this means that it most probably stopped broadcasting. Likewise, each time you visit TuneIn you will discover new radio stations.
Delay the video from TV settings
To avoid this problem, you can try setting the delay of video (if your TV supports this feature). When there is a group of speakers playing the same content, buffering is required to guarantee that all speakers have perfect synchronization. That's why you notice this delay.
There are 2 functions for this USB port:
1. Charge your tablet/Smartphone.
2. Playback content stored in either USB Flash Drive or HDD
You can connect either USB HDD or flash driver, no matter if it is NTFS or FAT32 formatted. At the moment there is a limitation on the App supporting only 270 songs. This limitation will be resolved with a f/w upgrade soon.
Inside My Music you will find a USB selection. Once you press it, you are able to access the files of your USB. The USB selection appears only if there is a USB flash drive or HDD connected to the relevant USB port.