Simple! Install the free WiSound app from the Apple App Store, run the App, touch the Add Device button andfollow the on screen guide.
Simple! Install the free WiSound app from the Google Play store, and run it. Touch the Add Device button andfollow the on screen guide.
Your friends/guests can stream their music to the entire group of speakers without even downloading any Apps or having to connect to your sensitive Wi-Fi network. Just ask them to pair their phones/tablets viaBluetooth to your WiSound speaker or the Master speaker of a group!
Connect a WiSound Device (speaker or Widaptor attached to a stereo) in each room and control from yourphone/tablet what you want to listen to in each room or group of rooms separately.
Your friends can play music to all your WiSound connected speakers and stereos, with their phones!
WiDaptor turns your old Hi-FI and active speaker systems into wireless music systems.
The ability to transmit all over the network, sources physically connected to a speaker
They are just like your car radio presets and give you instant access to your favorite Web Radio stations.
Horizontal & Vertical placement
This is because the Teevy series products can be placed also on the wall vertically. When placed on a table, the FRONT panel IR&LEDS are enabled. When placed vertically on the wall, the TOP panel IR&LEDS are enabled.
WiSound Wireless Multiroom Devices are compatible with all 2.4GHz band routers and chances are very big your router is a 2.4GHz one
Absolutely not. All WiSound Wireless Multiroom Devices integrate a Wi-Fi router where you can connect your phone/tablet. And if you don’t desire Multiroom, there is always the Bluetooth option, which does not require a network at all. (Except Widaptor which does not support bluetooth)
In theory there is no limit.
As many as your router allows! In theory there is no limit to the number of WiSound Wireless Multiroom Devices that can be connected in one network, but the more devices the stronger (in terms of processing power) the router must be, to efficiently handle all these devices.
In theory there is no limit.
WiSound Wireless Multiroom is an open system, available to anyone within the same WiFi network. Anyone can play their tunes using the WiSound app, AirPlay or any other UPnP/DLNA app.
The WiSound app is currently available on Android and iOS! You can download it for free through the Apple appstore or the Google Play store
Just launch the WiSound app on your phone/tablet and the app will guide you through the rest
WiSound Wireless Multiroom Devices use your wireless network to connect. If there is no wireless network in your house, WiSound Wireless Multiroom Devices automatically create one.
Using Wi-Fi the music is streamed from your own music library spread all over your home network, (your laptop, a NAS, your USB disk, etc), or any supported cloud based music service to the WiSound Wireless Multiroom Device.
No, unless you want to listen to internet music services. To listen to music available on your local devices (smartphone, tablet, USB disk, PC, etc) all you need is a smartphone or a tablet. The rest is taken care by the WiSound Device.
WiSound Wireless Multiroom works anywhere within your home network.
The App is required only for use of the speaker with Wi-Fi. You can fully operate the speaker without App, for Bluetooth, Optical and Analog sources.
When you run the App for the first time the speakers are not connected to your network. To connect the speakers to your network, simply press Add Device on the App and follow the steps appearing on the App.
If you have already one speaker and want to add another, simply press the + on the top right of the Device List.
Searching process with WPS button normally takes less than 1 minute.
Depending on your Wi-Fi router, there are rare occasions that the network configuration process with WPS button does not work.
As advised by the App:
1. Connect your phone directly to the speaker's Wi-Fi
2. Fill in the App, the password of your Wi-Fi router
3. Select from within the App your Wi-Fi router
You are advised to name each speaker differently. This way you will be able to identify very easily which speaker you are controlling through the App.
You can rename any speaker any time, from within the App. Simply select settings (the cog wheel icon) and press ‘Rename’.
When you are setting up a speaker on Wi-Fi and you press the WPS button, you will hear a voice prompt saying: "Wi-Fi searching". If you don't hear this prompt then you may need to press the WPS button once more.
You only need to set up each speaker once. You can use the system through many phone/tablets (even simultaneously), just by installing the WiSound application to your phone/tablet.
If you have both Analogue and Optical options for the TV connection, we recommend you use the Optical interface. This is because the sound quality of Optical interface is better, giving better sound quality with less noise.
Even if you TV set is very old (without optical out) you still can use it without any problem. Chances are that your TV is equipped with SCART connector on the back. In such a case, all you need is a SCART to RCA cable or adaptor.
The LED indicator needs to be Orange. If not, press the INPUT button until the LED turns Orange.
Just ignore 5GHz interface.
The new Wi-Fi routers tend to be dual band (2.4GHz and 5GHz). Since speakers are 2.4GHz, you need to connect your Smartphone or Tablet through 2.4GHz interface of the router.
Internet access is not a must have for the speakers to work. It is only required to access the various music streaming services.
Maybe your Wi-Fi Router has very weak signal or your speaker is placed too far away from your Wi-Fi router. Try moving speaker closer to the Wi-Fi router.
No. Not at all.
Once you have successfully installed your speakers to your Wi-Fi, you need not to do anything else regarding Wi-Fi settings. Each time you turn ON the speaker, it will automatically connect to your Wi-Fi network.
Yes you can, but this is not recommended. If you disable the password from your speakers and your speakers are connected to your Wi-Fi network, it's like giving access to your network to anyone. This is because each Wi-Fi speaker can act like a Wi-Fi router itself.
Your system will be more stable.
Using a separate, dedicated router for your wireless speakers will make the whole system much more stable. Like this, your music streaming to speakers is not influenced by your web activities (web browsing, torrent downloading, etc…)
Once properly connected and installed, it can give access to your network through its Wi-Fi interface. Like this, if there are areas in your home with no /low Wi-Fi signal but you have a speaker in the middle, simply connect your PC/phone/tablet to speaker's Wi-Fi. You will have access to the web, without any problem, because the speaker is closer to you and thus you get stronger Wi-Fi signal.
You need to use a Wi-Fi access point configured as a Repeater. The perfect place to install this access point is in the middle of the path between Wi-Fi router and speaker.
You can see some.
If you have 3G/4G connection, simply use the relevant streaming applications and connect your Smartphone / Tablet to your speaker through Bluetooth. Note: in case of IOS device you can also use Airplay as an alternative way.
The 3.5mm Analogue input takes priority over the RCA input. This means that if you have a source connected to 3.5mm input, the RCA input will be ignored. Simply unplug the cable connected to the 3.5mm input.
This can happen even though the speaker's volume is set to maximum.
This is because the volume on your analogue source is independent. Please make sure that the volume control of your analogue source has been set to maximum. If this is set to maximum, but the volume is still low, then maybe the analogue output of your source is very low. In such a case you will need to use a preamplifier.
You can connect any source with an analogue output, like: Cell Phone, Smartphone, Tablet, MP3 player, PC, CD, TV, DVD, Turntable through phono stage, etc…
You should preferably use Wi-Fi, since with Wi-Fi there is no compression involved, making the sound more natural and dynamic.
Because there is compression involved.
The standard compression for Bluetooth is SBC, which lacks transparency in the high frequencies. If you use a Bluetooth source with Apt-x codec support, then the results will be better. Of course, you will still get the best performance through Wi-Fi.
With Bluetooth you play whatever you want.
Bluetooth has the advantage that it acts like a virtual sound card for your tablet / Smartphone or PC. This means that, whatever streaming service or internet radio station you listen to on your device, it will be transmitted faultlessly to the speaker without you having to worry if your streaming service of choice is currently supported by the speaker or not.
Firstly, verify that the volume is set to maximum on the speaker. You will then need to turn up the volume on the Smartphone / Tablet. These two volume controls are independent, so you need to control both of them.
In order to play songs through Bluetooth, you need to use the default music play of your tablet/Smartphone.
Only when the BT input on the speaker is selected you are able to see the speaker listed under Bluetooth devices on your Smartphone / Tablet. If an input other than Bluetooth is selected (AUX / Optical / Wi-Fi), then the Bluetooth interface is deactivated.
Bring source and speaker closer
Bluetooth has a maximum operational distance of about 10 meters. It is also very sensitive to obstacles between your Smartphone / tablet and speaker. If you are experiencing audio drop-outs, it is recommended to either move closer to the speaker or use the speaker with Wi-Fi.
Υou can jump to previous / next song any time you wish, just by pressing the relevant buttons on the device or on the remote.
Each button serves a different function, depending on if it is pressed short or long. A short press is pressing briefly once. A long press is pressing and keeping it pressed for more than 2 seconds.
All speakers are equipped with audio limiters, so that you can play loud without going over the safe level.
To obtain maximum audio performance you are strongly advised to disable the TV's own speaker and let only the Wisound speaker play. Please refer to your TV's menu for a selection of Audio Output Setting and set it to Optical. Alternatively, you can find an option to disable TV's speaker.
No, not needed.
The App can operate with many smart phones/tablets in parallel. This means that if you have selected a song, at any time, your friend can select another song from another smartphone/tablet. Your song will stop and your friend's song will start.
You can select the relevant input and adjust volume from speaker's buttons or remote control without making use of your tablet/smartphone
Select from the App either L or R.
When you are in the Device List inside the App, there is a ‘LR’ symbol on the bottom right. Pressing on that symbol, it cycles: LR-->L-->R, so that you can choose that specific speaker to play both left and right, only Left, or only the right channel.
Use your phone's / tablet's speakerer volume buttons
By using your phone's volume buttons, you can control the volume of all the speakers simultaneously.
On the bottom of the Device List, there is a button Play All / Pause All. Each time you press it, you play or pause the music to all the speakers of the system.
The purpose of defining one speaker as ‘Master’ and some as ‘Slaves’ is to make a group that will play the same music.
Having your speaker updated is recommended, since new features and improvements are added in each new release of the firmware.
One is on the phone / tablet and one is on the speaker
The App is the software that runs on your tablet or Smartphone, while the Firmware is the software that runs on the speaker.
Learn function is designed to teach your speaker to respond to Volume UP/DOWN commands of your TV's remote. Follow the steps described in the quick guide.
Control the speaker's volume
The LEARN function is supported by both Teevy and Cuby series.
In a remote music server
The search results come from a big music server. You can access your favorite songs and artists very easily.
Yes, of course.
Τhat's what Bluetooth is for. Simply use the Spotify App on your device and pair your smartphone or tablet to the speaker via Bluetooth.
You need to run the Spotify App, select your favorite music and then press on the Spotify Connect icon. Spotify Premium is supported by the native Spotify App. You will then find the list of available speakers to play music to.
Use either Airplay or DLNA
For IOS devices, you always have the option of Airplay. For Android devices you will need to play through either Bluetooth or a 3rd party App (like Bubble UPNP, etc…)
By firstly selecting settings (cog wheel) and then pressing on Speaker Info. From here you can see Device Name, SSID, Firmware release version/date, change of language prompts, etc...
No need. The speaker needs to be configured only once. Once properly configured, the speaker will try to connect to the last configured Wi-Fi router.
This is normal
This is absolutely normal. Each speaker is equipped with an automatic wake-up mechanism. When it senses audio coming from either Optical or Analog inputs, it wakes up and starts music reproduction.
Wake up from standby is activated.
The Auto Wake-Up mechanism can also select the input. For example, If music comes into the analogue input, the speaker will wake-up and select Analogue as input source no matter what was the source before turning it off. The same applies for Optical input.
This is what exactly happens.
The speaker remembers the volume setting before standby and wakes up with the same volume setting.
It is not recommended to leave the speaker on if not in use.
Just wait a bit.
The speaker needs about 30 seconds to turn ON in Wi-Fi mode. During these first 30 seconds the Orange LED blinks and Wi-Fi is not in fully operational status. Please wait a while until you listed to the booting sound. Now your speaker is ready for use.
It is recommended that you disconnect the power supply from the wall outlet. Like this, you will save the minor standby current consumption.
If you select the settings (cog wheel) and then select Speaker Info, there is a Device Password option. If you select this option, a pop up will appear inside which you will need to select WPA PSK and then fill your password.
This is normal.
You will need your tablet or Smartphone to configure only once the relevant radio presets. You will then access the presets by pressing the relevant buttons on the speaker's keys or remote control.
Bluetooth is 10m, Wi-Fi is 30m.
Simply, select the settings (cog wheel) of the speaker of interest. You will then need to select Device Content. From the presets list, chose which one you want to listen to.
Presets are stored on an internal memory and cannot be erased with a power cut.
This is normal if radio station stopped broadcasting.
TuneIn is a dynamic database of radio stations that constantly updates the guide to add more and more content. If you cannot find the specific radio station anymore, this means that it most probably stopped broadcasting. Likewise, each time you visit TuneIn you will discover new radio stations.
Delay the video from TV settings
To avoid this problem, you can try setting the delay of video (if your TV supports this feature). When there is a group of speakers playing the same content, buffering is required to guarantee that all speakers have perfect synchronization. That's why you notice this delay.
There are 2 functions for this USB port:
1. Charge your tablet/Smartphone.
2. Playback content stored in either USB Flash Drive or HDD
You can connect either USB HDD or flash driver, no matter if it is NTFS or FAT32 formatted. At the moment there is a limitation on the App supporting only 270 songs. This limitation will be resolved with a f/w upgrade soon.
Inside My Music you will find a USB selection. Once you press it, you are able to access the files of your USB. The USB selection appears only if there is a USB flash drive or HDD connected to the relevant USB port.